LCDd.conf

Aus VDR Wiki
(Unterschied zwischen Versionen)
Wechseln zu: Navigation, Suche
K (Änderungen von Benutzer:212.96.8.81 rückgängig gemacht und letzte Version von Benutzer:Hulk wiederhergestellt)
(22)
Zeile 1: Zeile 1:
Konfigurationsdatei des [[Lcdproc-plugin|Lcdproc-plugins]]
+
CdBgL8  <a href="http://uedqesiosqgo.com/">uedqesiosqgo</a>, [url=http://sxqjtefqmggb.com/]sxqjtefqmggb[/url], [link=http://itjbigvvbhoz.com/]itjbigvvbhoz[/link], http://mdbxyckwjycg.com/
 
+
{{Box Datei | [[Struktur|/etc]]/LCDd.conf |
+
<pre>
+
# LCDd.conf
+
#
+
# This file contains the configuration for the LCDd server.
+
#
+
# The format is ini-file-like. It is divided into sections that start at
+
# markers that look like [section]. Comments are all line-based comments,
+
# and are lines that start with '#' or ';'.
+
#
+
# The server has a 'central' section named [server]. Further each driver
+
# has a section which defines how the driver acts.
+
#
+
# The drivers are activated by specifiying them in a driver= line in the
+
# server section, like:
+
#
+
#  Driver=curses
+
#
+
# This tells LCDd to use the curses driver. The first driver that is
+
# loaded and is capable of output becomes 'the' output driver.
+
# All extra drivers can only serve as input.
+
# The default driver to use is curses.
+
#
+
# The drivers can read their own options from the config file, but most of
+
# them don't do this yet. They expect 'command-line'-format parameters that
+
# were previously placed on the command line. These parameters can be
+
# given to the driver in the following way:
+
#
+
#  Arguments="place arguments here"
+
#
+
# The arguments between the quotes are passed to the driver.
+
# As said before these are the same arguments that the driver would have
+
# been passed under the old command line format of
+
#
+
#  -d <driver> "<driverargs>"
+
#
+
# Note that the -d option still works, but not allows driverargs anymore.
+
# If -d is specified on the command line, the Driver= options in the
+
# config file are ignored.
+
 
+
 
+
[server]
+
# Server section with all kinds of settings for the LCDd server
+
 
+
#Driver=none
+
#Driver=curses
+
Driver=HD44780
+
#Driver=lcdm001
+
#Driver=MtxOrb
+
#Driver=CFontz
+
#
+
# Tells the server to load the given drivers. Multiple lines can be given.
+
# NOTE: You may activate several input (input only) drivers but only ONE output
+
#      driver, which should be the first.
+
 
+
Bind=127.0.0.1
+
# Tells the driver to bind to the given interface
+
 
+
Port=13666
+
# Listen on this specified port; defaults to 13666.
+
 
+
#ReportLevel=5
+
# Sets the reporting level; defaults to 2 (warnings and errors only).
+
# ReportLevel=0 means NO DEBUG. This will avoid a flood of syslog ...
+
 
+
ReportToSyslog=no
+
# Should we report to syslog instead of stderr ? Default: no
+
 
+
WaitTime=5
+
# Sets the default time in seconds to displays a screen.
+
 
+
User=nobody
+
# User to run as.  LCDd will drop its root priviledges,
+
# if any, and run as this user instead.
+
 
+
ServerScreen=no
+
# Enables the built-in server screen [Default: no]
+
# yes      : always,
+
# no   : when there are no other screens active.
+
 
+
Foreground=no
+
# The server will stay in the foreground if set to true.
+
# Otherwise the server will fork to background and report
+
# to syslog
+
 
+
# TIP: The following options can also be modified from the
+
#      server menu (which requires a driver that supports input)
+
 
+
Heartbeat=open
+
# The server has serveral heartbeat modes
+
#  on    Stays on all the time
+
#  off  Stays off all the time
+
#  slash Rotating slash all the time
+
#  open  Can be controlled by all clients
+
 
+
InitialHeartbeat=on
+
# This sets the initial heartbeat state if the heartbeat mode is "open"
+
# Affects the server screen only ;)
+
#  on    Heartbeat activated
+
#  off  Heartbeat disabled
+
#  slash Heartbeat replaced with a rotating slash
+
 
+
Backlight=open
+
# The server has serveral backlight modes
+
#  on    Stays on all the time
+
#  off  Stays off all the time
+
#  open  Can be controlled by all clients
+
 
+
InitialBacklight=on
+
# This sets the initial backlight state if the backlight mode is "open"
+
# Affects the server screen only ;)
+
 
+
BacklightBrightness=255
+
# This sets the backlight brightness in state "on"
+
# NOTE: Not all drivers/devices support setting the brightness this
+
#      way. Some don't support switching the backlight on/off at all,
+
#      some can switch the backlight on or off only. If the latter is
+
#      the case BacklightBrightness must be > 0.
+
 
+
 
+
BacklightOffBrightness=0
+
# This sets the backlight brightness in state "off"
+
# NOTE: Not all drivers/devices support setting the brightness this
+
#      way. Some don't support switching the backlight on/off at all,
+
#      some can switch the backlight on or off only. If the latter is
+
#      the case BacklightBrightness must be = 0.
+
 
+
 
+
[input]
+
# Input section with settings that are related to input handling
+
# NOTE: Not all drivers have input functionality
+
 
+
# keypad settings
+
# Keyname      Function
+
#              Normal context              Menu context
+
# -------      --------------              ------------
+
#
+
# PauseKey    Pause/Continue              Enter/select
+
# BackKey      Back(Go to previous screen) Up/Left
+
# ForwardKey  Forward(Go to next screen)  Down/Right
+
# MainMenuKey  Open main menu              Exit/Cancel
+
 
+
#FreePauseKey=yes
+
# If set to yes, this prevents LCDd from handling the PauseKey itself
+
 
+
#FreeBackKey=yes
+
# If set to yes, this prevents LCDd from handling the BackKey itself
+
 
+
#FreeForwardKey=yes
+
# If set to yes, this prevents LCDd from handling the ForwardKey itself
+
 
+
#FreeMainMenuKey=no
+
# If set to yes, this prevents LCDd from handling the MainMenuKey itself
+
# TIP: Even if you "free" the above keys, you can still use the menu
+
#      provided you set FreeMainMenuKey=no
+
 
+
 
+
 
+
# Driver sections are below this line, in alphabetical order
+
 
+
 
+
[bayrad]
+
# EMAC BayRAD driver
+
 
+
Arguments="fill in here"
+
 
+
# -d --device Select the output device to use [/dev/lcd]
+
# -t --type Select the LCD type (size) [20x2]
+
# -s --speed Set the communication speed [19200]
+
# -h --help Show this help information
+
 
+
 
+
 
+
[CFontz]
+
# CrystalFontz driver
+
 
+
# Select the output device to use [/dev/lcd]
+
Device=/dev/ttyS0
+
 
+
# Select the LCD type (size) [20x4]
+
Size=20x4
+
 
+
# Set the initial contrast [140]
+
Contrast=140
+
 
+
# The backlight brightness settings are retrieved
+
# from the serversection now. And can therefore be
+
# modified from the server menu now.
+
 
+
# Set the communication speed [9600]
+
# possible values: 1200, 2400, 4800, 9600, 19200
+
Speed=9600
+
 
+
# Set the firmware version (New means >= 2.0) [no]
+
# if set, set Speed to 19200
+
NewFirmware=no
+
 
+
# Reinitialize the LCD's BIOS [no]
+
# normally you shouldn't need this
+
Reboot=no
+
 
+
 
+
[curses]
+
# Curses driver
+
 
+
# color settings
+
 
+
# foreground color [blue]
+
foreground=blue
+
 
+
# background color [cyan]
+
background=cyan
+
 
+
# backlight color [red]
+
backlight=red
+
 
+
# display size [20x4]
+
size=40x4
+
 
+
# What position (X,Y) to start the left top corner at...
+
# Default: (7,7)
+
topleftx=7
+
toplefty=7
+
 
+
 
+
[GLK]
+
# Matrix Orbital GLK driver
+
 
+
# Set the output device to use [/dev/lcd]
+
device=/dev/lcd
+
 
+
# Set the initial contrast [140]
+
contrast=140
+
 
+
# Set the communication speed [19200]
+
speed=19200
+
 
+
 
+
[HD44780]
+
# Hitachi HD44780 driver
+
# See docs/hd44780_howto.txt
+
 
+
Port=0x378
+
# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+
 
+
ConnectionType=winamp
+
# Select what type of connection. See documentation for types.
+
 
+
Keypad=no
+
# If you have a keypad connected. Keypad layout is currently not
+
# configureable from the config file.
+
 
+
Backlight=no
+
# If you have a switchable backlight.
+
 
+
Size=40x4
+
# Specifies the size of the LCD.
+
# In case of multiple combined displays, this should be the total size.
+
 
+
vspan=2,2
+
# For multiple displays: at what 'logical' lines do the individual displays
+
# start.
+
 
+
#extended=yes
+
# If you want to use more than 3 HD44780 controllers on the LPT, you need to
+
# specify this. See documentation.
+
 
+
#DelayMult=2
+
# If your display is slow and cannot keep up with the flow of data from
+
# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
+
# to increase the delays. Default: 1.
+
 
+
DelayBus=false
+
# You can reduce the inserted delays by setting this to false.
+
# On fast PCs it is possible your LCD does not respond correctly.
+
# Default: true.
+
 
+
#Device=/dev/ttyS0
+
# For PIC-an-LCD connection type only: the serial device to which the LCD
+
# is connected. Default: /dev/lcd
+
 
+
 
+
 
+
[IrMan]
+
#IrMan driver
+
 
+
Arguments="fill in here"
+
 
+
# -d --device Select the input device to use
+
# -c --config Select the configuration file to use
+
# -h --help Show this help information
+
 
+
 
+
 
+
[joy]
+
# Joystick driver
+
 
+
Arguments="-d /dev/js0"
+
 
+
# -d --device Select the input device to use [/dev/js0]
+
# -a --axes Modify the axis map
+
# -b --buttons Modify the button map
+
# -h --help Show this help information
+
 
+
 
+
 
+
[LB216]
+
# LB216 driver
+
 
+
Arguments="-d /dev/ttyS0 -s 9600"
+
 
+
# -d --device Select the output device to use [/dev/lcd]
+
# -t --type Select the LCD type (size) [16x2]
+
# -b --brightness Set the initial brightness [255]
+
# -s --speed Set the communication speed [9600]
+
# -r --reboot Reinitialize the LCD's BIOS
+
# -h --help Show this help information;
+
 
+
 
+
 
+
[lcdm001]
+
# LCDM001 driver
+
 
+
Device=/dev/ttyS1
+
 
+
# See [input] section for an explanation of the key mappings
+
 
+
PauseKey=DownKey
+
BackKey=LeftKey
+
ForwardKey=RightKey
+
MainMenuKey=UpKey
+
 
+
# You can rearrange the settings here.
+
# If your device is broken, have a look at server/drivers/lcdm001.h
+
 
+
[lircin]
+
# LIRC input driver
+
 
+
#lircrc=/etc/lircrc.lcdproc
+
# Specify an alternative location of the lircrc file, which is
+
# normally ~/.lircrc
+
 
+
#prog=lcdd
+
# Must be the same as in your lircrc
+
 
+
 
+
[MtxOrb]
+
# Matrix Orbital driver
+
 
+
# Select the output device to use [/dev/lcd]
+
device=/dev/lcd
+
 
+
# Set the display size [20x4]
+
size=20x4
+
 
+
# Switch on the backlight? [yes]
+
# NOTE: The driver will ignore this if the display
+
#      is a vfd or vfd as they crash if the backlight
+
#      is turned off
+
enablebacklight=yes
+
 
+
# Set the initial contrast [140]
+
# NOTE: The driver will ignore this if the display
+
#      is a vfd or vfd as they don't have this feature
+
contrast=140
+
 
+
# Set the communication speed [19200]
+
speed=19200
+
 
+
# Set the display type [lcd]
+
# Possible settings: lcd, lkd, vfd, vkd
+
type=lcd
+
 
+
# See [input] section for an explanation of the key mappings
+
 
+
PauseKey=N
+
BackKey=K
+
ForwardKey=A
+
MainMenuKey=F
+
 
+
# You can find out which key of your display sends which
+
# character by setting keypad_test_mode to yes and running
+
# LCDd. LCDd will output all characters it receives.
+
# Afterwards you can modify the settings above and set
+
# keypad_set_mode to no again.
+
 
+
keypad_test_mode=no
+
 
+
[SED1330]
+
# Seiko Epson 1330 driver
+
 
+
Port=0x378
+
# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+
 
+
Type=G321D
+
#Type=G121C
+
#Type=G242C
+
# Type of LCD module. G321D is the only one that is tested currently.
+
 
+
 
+
 
+
[SED1520]
+
# Seiko Epson 1520 driver
+
 
+
Port=0x378
+
# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+
 
+
 
+
[stv5730]
+
# stv5730 driver
+
 
+
Port=0x378
+
# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+
 
+
Mode=0
+
# Select Mode: 0=auto detect 1=full page mode 2=mixed mode
+
 
+
VidSys=1
+
# Select Video System: 1=PAL 2=NTSC
+
 
+
ZoomFirst=1
+
# Zoom First Line: 1=yes 0=no
+
 
+
#Select Color:
+
# 0=Black 1=Blue 2=Green 3=Cyan 4=Red 5=Magenta 6=Yellow 7=White
+
ColFline=4
+
# Color of first line text
+
ColText=1
+
# Color of text
+
ColCback=3
+
# Color of Character Background
+
ColCbord=0
+
# Color of Character Border
+
ColSback=2
+
# Color of Screen Background
+
 
+
 
+
[svgalib]
+
# SVGAlib driver
+
 
+
# No options
+
 
+
 
+
 
+
[T6963]
+
# Toshiba T6963 driver
+
 
+
Arguments="fill in here"
+
 
+
# -p --port Select the output port to use [0x378]
+
# -t --type Select the LCD type (size) [20x6]
+
# -h --help Show this help information
+
 
+
 
+
 
+
[text]
+
# Text driver
+
 
+
# display size [20x4]
+
size=20x4
+
 
+
 
+
 
+
 
+
[Wirz-sli]
+
# Wirz SLI LCD driver
+
 
+
Arguments="fill in here"
+
 
+
# -d --device Select the output device to use [/dev/lcd]
+
# -s --speed Set the communication speed [19200]
+
# -h --help Show this help information
+
</pre>
+
}}
+
 
+
[[Kategorie:Konfigurationsdateien]]
+

Version vom 1. Januar 2010, 01:05 Uhr

CdBgL8 <a href="http://uedqesiosqgo.com/">uedqesiosqgo</a>, [url=http://sxqjtefqmggb.com/]sxqjtefqmggb[/url], [link=http://itjbigvvbhoz.com/]itjbigvvbhoz[/link], http://mdbxyckwjycg.com/