LCDd.conf

Aus VDR Wiki
(Unterschied zwischen Versionen)
Wechseln zu: Navigation, Suche
(22)
K (Änderungen von 94.240.131.24 (Diskussion) rückgängig gemacht und letzte Version von Wirbel wiederhergestellt)
 
(2 dazwischenliegende Versionen von 2 Benutzern werden nicht angezeigt)
Zeile 1: Zeile 1:
VM8hKA  <a href="http://zacvthkybrjo.com/">zacvthkybrjo</a>, [url=http://xyvnhmyvzmlu.com/]xyvnhmyvzmlu[/url], [link=http://owcaqsbidmfc.com/]owcaqsbidmfc[/link], http://yuicozdlkzra.com/
+
Konfigurationsdatei des [[Lcdproc-plugin|Lcdproc-plugins]]
 +
 
 +
{{Box Datei | [[Struktur|/etc]]/LCDd.conf |
 +
<pre>
 +
# LCDd.conf
 +
#
 +
# This file contains the configuration for the LCDd server.
 +
#
 +
# The format is ini-file-like. It is divided into sections that start at
 +
# markers that look like [section]. Comments are all line-based comments,
 +
# and are lines that start with '#' or ';'.
 +
#
 +
# The server has a 'central' section named [server]. Further each driver
 +
# has a section which defines how the driver acts.
 +
#
 +
# The drivers are activated by specifiying them in a driver= line in the
 +
# server section, like:
 +
#
 +
#  Driver=curses
 +
#
 +
# This tells LCDd to use the curses driver. The first driver that is
 +
# loaded and is capable of output becomes 'the' output driver.
 +
# All extra drivers can only serve as input.
 +
# The default driver to use is curses.
 +
#
 +
# The drivers can read their own options from the config file, but most of
 +
# them don't do this yet. They expect 'command-line'-format parameters that
 +
# were previously placed on the command line. These parameters can be
 +
# given to the driver in the following way:
 +
#
 +
#  Arguments="place arguments here"
 +
#
 +
# The arguments between the quotes are passed to the driver.
 +
# As said before these are the same arguments that the driver would have
 +
# been passed under the old command line format of
 +
#
 +
#  -d <driver> "<driverargs>"
 +
#
 +
# Note that the -d option still works, but not allows driverargs anymore.
 +
# If -d is specified on the command line, the Driver= options in the
 +
# config file are ignored.
 +
 
 +
 
 +
[server]
 +
# Server section with all kinds of settings for the LCDd server
 +
 
 +
#Driver=none
 +
#Driver=curses
 +
Driver=HD44780
 +
#Driver=lcdm001
 +
#Driver=MtxOrb
 +
#Driver=CFontz
 +
#
 +
# Tells the server to load the given drivers. Multiple lines can be given.
 +
# NOTE: You may activate several input (input only) drivers but only ONE output
 +
#      driver, which should be the first.
 +
 
 +
Bind=127.0.0.1
 +
# Tells the driver to bind to the given interface
 +
 
 +
Port=13666
 +
# Listen on this specified port; defaults to 13666.
 +
 
 +
#ReportLevel=5
 +
# Sets the reporting level; defaults to 2 (warnings and errors only).
 +
# ReportLevel=0 means NO DEBUG. This will avoid a flood of syslog ...
 +
 
 +
ReportToSyslog=no
 +
# Should we report to syslog instead of stderr ? Default: no
 +
 
 +
WaitTime=5
 +
# Sets the default time in seconds to displays a screen.
 +
 
 +
User=nobody
 +
# User to run as.  LCDd will drop its root priviledges,
 +
# if any, and run as this user instead.
 +
 
 +
ServerScreen=no
 +
# Enables the built-in server screen [Default: no]
 +
# yes      : always,
 +
# no   : when there are no other screens active.
 +
 
 +
Foreground=no
 +
# The server will stay in the foreground if set to true.
 +
# Otherwise the server will fork to background and report
 +
# to syslog
 +
 
 +
# TIP: The following options can also be modified from the
 +
#      server menu (which requires a driver that supports input)
 +
 
 +
Heartbeat=open
 +
# The server has serveral heartbeat modes
 +
#  on    Stays on all the time
 +
#  off  Stays off all the time
 +
#  slash Rotating slash all the time
 +
#  open  Can be controlled by all clients
 +
 
 +
InitialHeartbeat=on
 +
# This sets the initial heartbeat state if the heartbeat mode is "open"
 +
# Affects the server screen only ;)
 +
#  on    Heartbeat activated
 +
#  off  Heartbeat disabled
 +
#  slash Heartbeat replaced with a rotating slash
 +
 
 +
Backlight=open
 +
# The server has serveral backlight modes
 +
#  on    Stays on all the time
 +
#  off  Stays off all the time
 +
#  open  Can be controlled by all clients
 +
 
 +
InitialBacklight=on
 +
# This sets the initial backlight state if the backlight mode is "open"
 +
# Affects the server screen only ;)
 +
 
 +
BacklightBrightness=255
 +
# This sets the backlight brightness in state "on"
 +
# NOTE: Not all drivers/devices support setting the brightness this
 +
#      way. Some don't support switching the backlight on/off at all,
 +
#      some can switch the backlight on or off only. If the latter is
 +
#      the case BacklightBrightness must be > 0.
 +
 
 +
 
 +
BacklightOffBrightness=0
 +
# This sets the backlight brightness in state "off"
 +
# NOTE: Not all drivers/devices support setting the brightness this
 +
#      way. Some don't support switching the backlight on/off at all,
 +
#      some can switch the backlight on or off only. If the latter is
 +
#      the case BacklightBrightness must be = 0.
 +
 
 +
 
 +
[input]
 +
# Input section with settings that are related to input handling
 +
# NOTE: Not all drivers have input functionality
 +
 
 +
# keypad settings
 +
# Keyname      Function
 +
#              Normal context              Menu context
 +
# -------      --------------              ------------
 +
#
 +
# PauseKey    Pause/Continue              Enter/select
 +
# BackKey      Back(Go to previous screen) Up/Left
 +
# ForwardKey  Forward(Go to next screen)  Down/Right
 +
# MainMenuKey  Open main menu              Exit/Cancel
 +
 
 +
#FreePauseKey=yes
 +
# If set to yes, this prevents LCDd from handling the PauseKey itself
 +
 
 +
#FreeBackKey=yes
 +
# If set to yes, this prevents LCDd from handling the BackKey itself
 +
 
 +
#FreeForwardKey=yes
 +
# If set to yes, this prevents LCDd from handling the ForwardKey itself
 +
 
 +
#FreeMainMenuKey=no
 +
# If set to yes, this prevents LCDd from handling the MainMenuKey itself
 +
# TIP: Even if you "free" the above keys, you can still use the menu
 +
#      provided you set FreeMainMenuKey=no
 +
 
 +
 
 +
 
 +
# Driver sections are below this line, in alphabetical order
 +
 
 +
 
 +
[bayrad]
 +
# EMAC BayRAD driver
 +
 
 +
Arguments="fill in here"
 +
 
 +
# -d --device Select the output device to use [/dev/lcd]
 +
# -t --type Select the LCD type (size) [20x2]
 +
# -s --speed Set the communication speed [19200]
 +
# -h --help Show this help information
 +
 
 +
 
 +
 
 +
[CFontz]
 +
# CrystalFontz driver
 +
 
 +
# Select the output device to use [/dev/lcd]
 +
Device=/dev/ttyS0
 +
 
 +
# Select the LCD type (size) [20x4]
 +
Size=20x4
 +
 
 +
# Set the initial contrast [140]
 +
Contrast=140
 +
 
 +
# The backlight brightness settings are retrieved
 +
# from the serversection now. And can therefore be
 +
# modified from the server menu now.
 +
 
 +
# Set the communication speed [9600]
 +
# possible values: 1200, 2400, 4800, 9600, 19200
 +
Speed=9600
 +
 
 +
# Set the firmware version (New means >= 2.0) [no]
 +
# if set, set Speed to 19200
 +
NewFirmware=no
 +
 
 +
# Reinitialize the LCD's BIOS [no]
 +
# normally you shouldn't need this
 +
Reboot=no
 +
 
 +
 
 +
[curses]
 +
# Curses driver
 +
 
 +
# color settings
 +
 
 +
# foreground color [blue]
 +
foreground=blue
 +
 
 +
# background color [cyan]
 +
background=cyan
 +
 
 +
# backlight color [red]
 +
backlight=red
 +
 
 +
# display size [20x4]
 +
size=40x4
 +
 
 +
# What position (X,Y) to start the left top corner at...
 +
# Default: (7,7)
 +
topleftx=7
 +
toplefty=7
 +
 
 +
 
 +
[GLK]
 +
# Matrix Orbital GLK driver
 +
 
 +
# Set the output device to use [/dev/lcd]
 +
device=/dev/lcd
 +
 
 +
# Set the initial contrast [140]
 +
contrast=140
 +
 
 +
# Set the communication speed [19200]
 +
speed=19200
 +
 
 +
 
 +
[HD44780]
 +
# Hitachi HD44780 driver
 +
# See docs/hd44780_howto.txt
 +
 
 +
Port=0x378
 +
# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
 +
 
 +
ConnectionType=winamp
 +
# Select what type of connection. See documentation for types.
 +
 
 +
Keypad=no
 +
# If you have a keypad connected. Keypad layout is currently not
 +
# configureable from the config file.
 +
 
 +
Backlight=no
 +
# If you have a switchable backlight.
 +
 
 +
Size=40x4
 +
# Specifies the size of the LCD.
 +
# In case of multiple combined displays, this should be the total size.
 +
 
 +
vspan=2,2
 +
# For multiple displays: at what 'logical' lines do the individual displays
 +
# start.
 +
 
 +
#extended=yes
 +
# If you want to use more than 3 HD44780 controllers on the LPT, you need to
 +
# specify this. See documentation.
 +
 
 +
#DelayMult=2
 +
# If your display is slow and cannot keep up with the flow of data from
 +
# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
 +
# to increase the delays. Default: 1.
 +
 
 +
DelayBus=false
 +
# You can reduce the inserted delays by setting this to false.
 +
# On fast PCs it is possible your LCD does not respond correctly.
 +
# Default: true.
 +
 
 +
#Device=/dev/ttyS0
 +
# For PIC-an-LCD connection type only: the serial device to which the LCD
 +
# is connected. Default: /dev/lcd
 +
 
 +
 
 +
 
 +
[IrMan]
 +
#IrMan driver
 +
 
 +
Arguments="fill in here"
 +
 
 +
# -d --device Select the input device to use
 +
# -c --config Select the configuration file to use
 +
# -h --help Show this help information
 +
 
 +
 
 +
 
 +
[joy]
 +
# Joystick driver
 +
 
 +
Arguments="-d /dev/js0"
 +
 
 +
# -d --device Select the input device to use [/dev/js0]
 +
# -a --axes Modify the axis map
 +
# -b --buttons Modify the button map
 +
# -h --help Show this help information
 +
 
 +
 
 +
 
 +
[LB216]
 +
# LB216 driver
 +
 
 +
Arguments="-d /dev/ttyS0 -s 9600"
 +
 
 +
# -d --device Select the output device to use [/dev/lcd]
 +
# -t --type Select the LCD type (size) [16x2]
 +
# -b --brightness Set the initial brightness [255]
 +
# -s --speed Set the communication speed [9600]
 +
# -r --reboot Reinitialize the LCD's BIOS
 +
# -h --help Show this help information;
 +
 
 +
 
 +
 
 +
[lcdm001]
 +
# LCDM001 driver
 +
 
 +
Device=/dev/ttyS1
 +
 
 +
# See [input] section for an explanation of the key mappings
 +
 
 +
PauseKey=DownKey
 +
BackKey=LeftKey
 +
ForwardKey=RightKey
 +
MainMenuKey=UpKey
 +
 
 +
# You can rearrange the settings here.
 +
# If your device is broken, have a look at server/drivers/lcdm001.h
 +
 
 +
[lircin]
 +
# LIRC input driver
 +
 
 +
#lircrc=/etc/lircrc.lcdproc
 +
# Specify an alternative location of the lircrc file, which is
 +
# normally ~/.lircrc
 +
 
 +
#prog=lcdd
 +
# Must be the same as in your lircrc
 +
 
 +
 
 +
[MtxOrb]
 +
# Matrix Orbital driver
 +
 
 +
# Select the output device to use [/dev/lcd]
 +
device=/dev/lcd
 +
 
 +
# Set the display size [20x4]
 +
size=20x4
 +
 
 +
# Switch on the backlight? [yes]
 +
# NOTE: The driver will ignore this if the display
 +
#      is a vfd or vfd as they crash if the backlight
 +
#      is turned off
 +
enablebacklight=yes
 +
 
 +
# Set the initial contrast [140]
 +
# NOTE: The driver will ignore this if the display
 +
#      is a vfd or vfd as they don't have this feature
 +
contrast=140
 +
 
 +
# Set the communication speed [19200]
 +
speed=19200
 +
 
 +
# Set the display type [lcd]
 +
# Possible settings: lcd, lkd, vfd, vkd
 +
type=lcd
 +
 
 +
# See [input] section for an explanation of the key mappings
 +
 
 +
PauseKey=N
 +
BackKey=K
 +
ForwardKey=A
 +
MainMenuKey=F
 +
 
 +
# You can find out which key of your display sends which
 +
# character by setting keypad_test_mode to yes and running
 +
# LCDd. LCDd will output all characters it receives.
 +
# Afterwards you can modify the settings above and set
 +
# keypad_set_mode to no again.
 +
 
 +
keypad_test_mode=no
 +
 
 +
[SED1330]
 +
# Seiko Epson 1330 driver
 +
 
 +
Port=0x378
 +
# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
 +
 
 +
Type=G321D
 +
#Type=G121C
 +
#Type=G242C
 +
# Type of LCD module. G321D is the only one that is tested currently.
 +
 
 +
 
 +
 
 +
[SED1520]
 +
# Seiko Epson 1520 driver
 +
 
 +
Port=0x378
 +
# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
 +
 
 +
 
 +
[stv5730]
 +
# stv5730 driver
 +
 
 +
Port=0x378
 +
# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
 +
 
 +
Mode=0
 +
# Select Mode: 0=auto detect 1=full page mode 2=mixed mode
 +
 
 +
VidSys=1
 +
# Select Video System: 1=PAL 2=NTSC
 +
 
 +
ZoomFirst=1
 +
# Zoom First Line: 1=yes 0=no
 +
 
 +
#Select Color:
 +
# 0=Black 1=Blue 2=Green 3=Cyan 4=Red 5=Magenta 6=Yellow 7=White
 +
ColFline=4
 +
# Color of first line text
 +
ColText=1
 +
# Color of text
 +
ColCback=3
 +
# Color of Character Background
 +
ColCbord=0
 +
# Color of Character Border
 +
ColSback=2
 +
# Color of Screen Background
 +
 
 +
 
 +
[svgalib]
 +
# SVGAlib driver
 +
 
 +
# No options
 +
 
 +
 
 +
 
 +
[T6963]
 +
# Toshiba T6963 driver
 +
 
 +
Arguments="fill in here"
 +
 
 +
# -p --port Select the output port to use [0x378]
 +
# -t --type Select the LCD type (size) [20x6]
 +
# -h --help Show this help information
 +
 
 +
 
 +
 
 +
[text]
 +
# Text driver
 +
 
 +
# display size [20x4]
 +
size=20x4
 +
 
 +
 
 +
 
 +
 
 +
[Wirz-sli]
 +
# Wirz SLI LCD driver
 +
 
 +
Arguments="fill in here"
 +
 
 +
# -d --device Select the output device to use [/dev/lcd]
 +
# -s --speed Set the communication speed [19200]
 +
# -h --help Show this help information
 +
</pre>
 +
}}
 +
 
 +
[[Kategorie:Konfigurationsdateien]]

Aktuelle Version vom 1. Januar 2010, 08:56 Uhr

Konfigurationsdatei des Lcdproc-plugins

Datei
/etc/LCDd.conf
# LCDd.conf
#
# This file contains the configuration for the LCDd server.
#
# The format is ini-file-like. It is divided into sections that start at
# markers that look like [section]. Comments are all line-based comments,
# and are lines that start with '#' or ';'.
#
# The server has a 'central' section named [server]. Further each driver
# has a section which defines how the driver acts.
#
# The drivers are activated by specifiying them in a driver= line in the
# server section, like:
#
#   Driver=curses
#
# This tells LCDd to use the curses driver. The first driver that is
# loaded and is capable of output becomes 'the' output driver.
# All extra drivers can only serve as input.
# The default driver to use is curses.
#
# The drivers can read their own options from the config file, but most of
# them don't do this yet. They expect 'command-line'-format parameters that
# were previously placed on the command line. These parameters can be
# given to the driver in the following way:
#
#   Arguments="place arguments here"
#
# The arguments between the quotes are passed to the driver.
# As said before these are the same arguments that the driver would have
# been passed under the old command line format of
#
#   -d <driver> "<driverargs>"
#
# Note that the -d option still works, but not allows driverargs anymore.
# If -d is specified on the command line, the Driver= options in the
# config file are ignored.


[server]
# Server section with all kinds of settings for the LCDd server

#Driver=none
#Driver=curses
Driver=HD44780
#Driver=lcdm001
#Driver=MtxOrb
#Driver=CFontz
#
# Tells the server to load the given drivers. Multiple lines can be given.
# NOTE: You may activate several input (input only) drivers but only ONE output
#       driver, which should be the first.

Bind=127.0.0.1
# Tells the driver to bind to the given interface

Port=13666
# Listen on this specified port; defaults to 13666.

#ReportLevel=5
# Sets the reporting level; defaults to 2 (warnings and errors only). 
# ReportLevel=0 means NO DEBUG. This will avoid a flood of syslog ...

ReportToSyslog=no
# Should we report to syslog instead of stderr ? Default: no

WaitTime=5
# Sets the default time in seconds to displays a screen.

User=nobody
# User to run as.  LCDd will drop its root priviledges,
# if any, and run as this user instead.

ServerScreen=no
# Enables the built-in server screen [Default: no]
# yes      : always,
# no	   : when there are no other screens active.

Foreground=no
# The server will stay in the foreground if set to true.
# Otherwise the server will fork to background and report
# to syslog

# TIP: The following options can also be modified from the
#      server menu (which requires a driver that supports input)

Heartbeat=open
# The server has serveral heartbeat modes
#   on    Stays on all the time
#   off   Stays off all the time
#   slash Rotating slash all the time
#   open  Can be controlled by all clients

InitialHeartbeat=on
# This sets the initial heartbeat state if the heartbeat mode is "open"
# Affects the server screen only ;)
#   on    Heartbeat activated
#   off   Heartbeat disabled
#   slash Heartbeat replaced with a rotating slash

Backlight=open
# The server has serveral backlight modes
#   on    Stays on all the time
#   off   Stays off all the time
#   open  Can be controlled by all clients

InitialBacklight=on
# This sets the initial backlight state if the backlight mode is "open"
# Affects the server screen only ;)

BacklightBrightness=255
# This sets the backlight brightness in state "on"
# NOTE: Not all drivers/devices support setting the brightness this
#       way. Some don't support switching the backlight on/off at all,
#       some can switch the backlight on or off only. If the latter is
#       the case BacklightBrightness must be > 0.


BacklightOffBrightness=0
# This sets the backlight brightness in state "off"
# NOTE: Not all drivers/devices support setting the brightness this
#       way. Some don't support switching the backlight on/off at all,
#       some can switch the backlight on or off only. If the latter is
#       the case BacklightBrightness must be = 0.


[input]
# Input section with settings that are related to input handling
# NOTE: Not all drivers have input functionality

# keypad settings
# Keyname      Function
#              Normal context              Menu context
# -------      --------------              ------------
#
# PauseKey     Pause/Continue              Enter/select
# BackKey      Back(Go to previous screen) Up/Left
# ForwardKey   Forward(Go to next screen)  Down/Right
# MainMenuKey  Open main menu              Exit/Cancel

#FreePauseKey=yes
# If set to yes, this prevents LCDd from handling the PauseKey itself

#FreeBackKey=yes
# If set to yes, this prevents LCDd from handling the BackKey itself

#FreeForwardKey=yes
# If set to yes, this prevents LCDd from handling the ForwardKey itself

#FreeMainMenuKey=no
# If set to yes, this prevents LCDd from handling the MainMenuKey itself
# TIP: Even if you "free" the above keys, you can still use the menu
#      provided you set FreeMainMenuKey=no



# Driver sections are below this line, in alphabetical order


[bayrad]
# EMAC BayRAD driver

Arguments="fill in here"

# -d --device	Select the output device to use [/dev/lcd]
# -t --type	Select the LCD type (size) [20x2]
# -s --speed	Set the communication speed [19200]
# -h --help	Show this help information



[CFontz]
# CrystalFontz driver

# Select the output device to use [/dev/lcd]
Device=/dev/ttyS0

# Select the LCD type (size) [20x4]
Size=20x4

# Set the initial contrast [140]
Contrast=140

# The backlight brightness settings are retrieved
# from the serversection now. And can therefore be
# modified from the server menu now.

# Set the communication speed [9600]
# possible values: 1200, 2400, 4800, 9600, 19200
Speed=9600

# Set the firmware version (New means >= 2.0) [no]
# if set, set Speed to 19200
NewFirmware=no

# Reinitialize the LCD's BIOS [no]
# normally you shouldn't need this
Reboot=no


[curses]
# Curses driver

# color settings

# foreground color [blue]
foreground=blue

# background color [cyan]
background=cyan

# backlight color [red]
backlight=red

# display size [20x4]
size=40x4

# What position (X,Y) to start the left top corner at...
# Default: (7,7)
topleftx=7
toplefty=7


[GLK]
# Matrix Orbital GLK driver

# Set the output device to use [/dev/lcd]
device=/dev/lcd

# Set the initial contrast [140]
contrast=140

# Set the communication speed [19200]
speed=19200


[HD44780]
# Hitachi HD44780 driver
# See docs/hd44780_howto.txt

Port=0x378
# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC

ConnectionType=winamp
# Select what type of connection. See documentation for types.

Keypad=no
# If you have a keypad connected. Keypad layout is currently not
# configureable from the config file.

Backlight=no
# If you have a switchable backlight.

Size=40x4
# Specifies the size of the LCD.
# In case of multiple combined displays, this should be the total size.

vspan=2,2
# For multiple displays: at what 'logical' lines do the individual displays
# start.

#extended=yes
# If you want to use more than 3 HD44780 controllers on the LPT, you need to
# specify this. See documentation.

#DelayMult=2
# If your display is slow and cannot keep up with the flow of data from
# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
# to increase the delays. Default: 1.

DelayBus=false
# You can reduce the inserted delays by setting this to false.
# On fast PCs it is possible your LCD does not respond correctly.
# Default: true.

#Device=/dev/ttyS0
# For PIC-an-LCD connection type only: the serial device to which the LCD
# is connected. Default: /dev/lcd



[IrMan]
#IrMan driver

Arguments="fill in here"

# -d --device	Select the input device to use
# -c --config	Select the configuration file to use
# -h --help	Show this help information



[joy]
# Joystick driver

Arguments="-d /dev/js0"

# -d --device	Select the input device to use [/dev/js0]
# -a --axes	Modify the axis map
# -b --buttons	Modify the button map
# -h --help	Show this help information



[LB216]
# LB216 driver

Arguments="-d /dev/ttyS0 -s 9600"

# -d --device	Select the output device to use [/dev/lcd]
# -t --type	Select the LCD type (size) [16x2]
# -b --brightness	Set the initial brightness [255]
# -s --speed	Set the communication speed [9600]
# -r --reboot	Reinitialize the LCD's BIOS
# -h --help	Show this help information;



[lcdm001]
# LCDM001 driver

Device=/dev/ttyS1

# See [input] section for an explanation of the key mappings

PauseKey=DownKey
BackKey=LeftKey
ForwardKey=RightKey
MainMenuKey=UpKey

# You can rearrange the settings here.
# If your device is broken, have a look at server/drivers/lcdm001.h

[lircin]
# LIRC input driver

#lircrc=/etc/lircrc.lcdproc
# Specify an alternative location of the lircrc file, which is
# normally ~/.lircrc

#prog=lcdd
# Must be the same as in your lircrc


[MtxOrb]
# Matrix Orbital driver

# Select the output device to use [/dev/lcd]
device=/dev/lcd

# Set the display size [20x4]
size=20x4

# Switch on the backlight? [yes]
# NOTE: The driver will ignore this if the display
#       is a vfd or vfd as they crash if the backlight
#       is turned off
enablebacklight=yes

# Set the initial contrast [140]
# NOTE: The driver will ignore this if the display
#       is a vfd or vfd as they don't have this feature
contrast=140

# Set the communication speed [19200]
speed=19200

# Set the display type [lcd]
# Possible settings: lcd, lkd, vfd, vkd
type=lcd

# See [input] section for an explanation of the key mappings

PauseKey=N
BackKey=K
ForwardKey=A
MainMenuKey=F

# You can find out which key of your display sends which
# character by setting keypad_test_mode to yes and running
# LCDd. LCDd will output all characters it receives.
# Afterwards you can modify the settings above and set
# keypad_set_mode to no again.

keypad_test_mode=no

[SED1330]
# Seiko Epson 1330 driver

Port=0x378
# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC

Type=G321D
#Type=G121C
#Type=G242C
# Type of LCD module. G321D is the only one that is tested currently.



[SED1520]
# Seiko Epson 1520 driver

Port=0x378
# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC


[stv5730]
# stv5730 driver

Port=0x378
# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC

Mode=0
# Select Mode: 0=auto detect 1=full page mode 2=mixed mode

VidSys=1
# Select Video System: 1=PAL 2=NTSC

ZoomFirst=1
# Zoom First Line: 1=yes 0=no

#Select Color:
# 0=Black 1=Blue 2=Green 3=Cyan 4=Red 5=Magenta 6=Yellow 7=White
ColFline=4
# Color of first line text
ColText=1
# Color of text
ColCback=3
# Color of Character Background
ColCbord=0
# Color of Character Border
ColSback=2
# Color of Screen Background


[svgalib]
# SVGAlib driver

# No options



[T6963]
# Toshiba T6963 driver

Arguments="fill in here"

# -p --port	Select the output port to use [0x378]
# -t --type	Select the LCD type (size) [20x6]
# -h --help	Show this help information



[text]
# Text driver

# display size [20x4]
size=20x4




[Wirz-sli]
# Wirz SLI LCD driver

Arguments="fill in here"

# -d --device	Select the output device to use [/dev/lcd]
# -s --speed	Set the communication speed [19200]
# -h --help	Show this help information