Installscript-vdr.conf
Aus VDR Wiki
(Unterschied zwischen Versionen)
K |
K |
||
| Zeile 254: | Zeile 254: | ||
# path to scripts | # path to scripts | ||
SCRDIR="${VDR_CONFIG}/scripts" | SCRDIR="${VDR_CONFIG}/scripts" | ||
| + | </pre> | ||
| + | |||
| + | Konsole ''wechseln''. | ||
| + | |||
| + | <pre> | ||
| + | # Switch console to some terminal? Needs terminal number. For example ('8') | ||
| + | SWITCHTERMINAL="" | ||
</pre> | </pre> | ||
Version vom 7. April 2008, 13:46 Uhr
vdr.conf
# ----------------------------------------------------------- # Description: Environment for VDR # ----------------------------------------------------------- # # Format: # # VDR_OPTION="" # ^^^^^^ # use vdr --help # # VDR_EPG="..." (tr A-Z a-z) # ^^^ # --epg='...'
HOME="/root"
# VDR needs to run in non-UTF8 locale? #LC_CTYPE="POSIX" LC_COLLATE="C" TERM="linux"
# workaround for problems with NPTL ("Native Posix Thread Library")
#LD_ASSUME_KERNEL="2.4.1"
Installation Prefix.
# installation prefix PREFIX="/usr/local"
Das meiste wird hier aktiviert, und über die runvdr ausgeführt, die Scripts in ../admin/start-cmds/rc sollte man sich anpassen.
# ----------------------------------------------------------- # start / loads the following programs (runvdr start) # ----------------------------------------------------------- #START_ACTIVY="0" START_ADMIN="0" START_AMAROKGATEWAY="0" START_ATD="1" START_DVB="1" #START_DXR3="0" START_GLCDSPLASH="0" #START_IGOR="0" #START_IVTV="0" START_LCDD="0" START_LIRCD="1" START_LOADKEYS="0" START_MLNET="0" START_MVPLOADER="0" START_MYSQLD="0" START_NTPDATE="0" START_QUEUEHANDLER="0" START_RTORRENT="0" START_TUNE="0"
Angabe des Programms, welches für die Weiterleitung des Dolby-Digital Signals verantwortlich ist.
# ----------------------------------------------------------- # vdr # ----------------------------------------------------------- # send Dolby Digital audio to stdin of command CMD, e.g: "a52dec -o oss6" VDR_AUDIO=""
Verzeichnis, in dem sich die Konfigurationsdateien des VDR befinden.
# directory where vdr stores its config files. vdr defaults to /video VDR_CONFIG="/usr/local/etc/vdr"
Anzahl der DVB-Devices, die genutzt werden sollen (0,1,2 ...).
# use only the given DVB device (NUM = 0, 1, 2 ...) # there may be several -D options (default: all DVB devices will be used) VDR_DEV=""
File in dem das EPG gespeichert wird.
# write the EPG data into the given FILE (default is /video/epg.data)
# use '-E-' to disable this if FILE is a directory, the default EPG file will be created in that directory
VDR_EPG="${VDR_CONFIG}/epg.data"
# write images from the SVDRP command GRAB into the given DIR; DIR must be the full path name of an # existing directory, without any "..", double '/' or symlinks (default: none, same as -g-) VDR_GRAB="/tmp"
Verzeichnis, in dem sich die Plugins befinden.
# search for plugins in DIR (default is ./PLUGINS/lib)
VDR_LIB="${PREFIX}/lib/vdr"
# use a LIRC remote control device, attached to PATH (default: /dev/lircd) VDR_LIRC=""
Locale.
# search for locale files in DIR (default: <PREFIX>/VDR/locale) VDR_LOCALEDIR=""
Angabe des Logging-Levels (0,1,2,3).
# set log level # 0 = no logging # 1 = errors only # 2 = errors and info # 3 = errors, info and debug (default) VDR_LOG="3"
Host für das Simple-Video-Disk-Recorder-Protokoll (siehe SVDRP).
# destination hostname (default: 127.0.0.1) VDRDEST=""
Port für das Simple-Video-Disk-Recorder-Protokoll (siehe SVDRP).
# which port to listen vor SVDRP commands, see vdr --help. default (default: 2001) VDR_PORT=""
# use a remote control device, attached to PATH (default: /dev/ttyS1) VDR_RCU=""
Script, welches vor bzw. nach einer Aufnahme ausgeführt wird.
# call CMD before and after a recording, e.g:
VDR_RECORD="${VDR_CONFIG}/scripts/rwrapper.sh"
Script zum Herunterfahren des PCs, für das extb-plugin ändern in (${SCRDIR}/extb-poweroff.pl).
# call CMD to shutdown the computer
VDR_SHUTDOWN="${VDR_CONFIG}/scripts/shutdown.sh"
Ausgabe-Terminal zur Kontrolle von Meldungen des VDR.
# controlling tty ('/dev/tty8')
VDR_TERMINAL=""
# run as user USER (default: vdr) only applicable if started as root VDR_USER="root"
Verzeichnis für die Aufnahmen.
# use DIR as video directory (default: /video) VDR_VIDEO="/video0"
Hier wird die Zeit in Sekunden angegeben, die der Watchdog zur Reaktion benötigt.
# activate the watchdog timer with a timeout of SEC # seconds (default: 0); '0' disables the watchdog VDR_WATCHDOG="60"
Sonstieges.
# mute audio of the primary DVB device at startup (--mute) # don't use the keyboard as an input device (--no-kbd) # encode special characters in recording names to avoid problems with VFAT file systems (--vfat) USRDEV=""
Für Übersetzungen.
# -----------------------------------------------------------
# misc
# -----------------------------------------------------------
# locale
LANG="de_DE@euro"
TEXTDOMAIN="vdr"
TEXTDOMAINDIR="${VDR_CONFIG}/locale"
Beschreibung?
# Workaround for broadcasters not correctly implementing the standard. # According to "ETSI EN 300 468" the default character set is ISO6937. But # unfortunately some broadcasters actually use ISO-8859-9, but fail to # correctly announce that. If you set VDR_CHARSET_OVERRIDE=ISO-8859-9, then VDR # uses ISO-8859-9 as default. VDR_CHARSET_OVERRIDE="ISO-8859-9"
# svdrpsend.pl
SVDRPSENDCMD="${PREFIX}/bin/svdrpsend.pl -p ${VDR_PORT:-2001} -d ${VDRDEST:-127.0.0.1}"
Scripts / Konfiguration vom admin-plugin.
# path to admin
ADMDIR="${VDR_CONFIG}/admin"
Verzeichnis zu den Scripts.
# path to scripts
SCRDIR="${VDR_CONFIG}/scripts"
Konsole wechseln.
# Switch console to some terminal? Needs terminal number. For example ('8')
SWITCHTERMINAL=""
Falls andere Skripts, mit gestartet werden sollen.
# run script(s) / proc(s) with runvdr {start,stop}
MYSCRIPTS="/path/script /path/proc"
Klar.
# -----------------------------------------------------------
# config for shutdown
# -----------------------------------------------------------
# wake up method ('off','acpi','nvram','suspend','suspend-no-reboot')
WAKEUP_METHOD="off"
Falls das Board bekannt sein sollte.
# specify the iw (infowriter) name. (e.g: gigabyte_5aa) NVRAM_IWNAME=""
Klar.
# read board configuration from specified configuration file (e.g: "$PREFIX/etc/nvram-wakeup/nvram-wakeup.conf") NVRAM_CONFIG=""
Weitere Optionen.
# try "nvram-wakeup --help" NVRAM_OPT="--syslog"
Welchen Bootmanager?
# Which boot manager are you using? (grub/lilo) BOOT_MANAGER="grub"
Umgebungsvariablen für das burn-plugin.
# -----------------------------------------------------------
# config for plugins
# -----------------------------------------------------------
# burn, set JAVA_HOME environment variable, to point your JRE installation directory
JAVA_HOME="${JAVA_HOME}"
# burn, set PROJECTX_HOME environment variable, to point your ProjectX installation directory
PROJECTX_HOME="/usr/share/java"
# burn, use DIR to store ISO images
BURNISODIR="${BURNISODIR}"
# audiorecoder, use DIR as recording directory
AUDIORECORDERDIR="${AUDIORECORDERDIR}"
# muggle, use toplevel DIR for music
MUGGLEDIR="${MUGGLEDIR}"
osdimage-plugin / pictures-plugin
# osdimage, pictures, use toplevel DIR for images IMAGEDIR="/video0/images"
Umgebungsvariable für VIDEGOR.
# igor environment IGOR="localhost:11072"
